Each kit contains the following:

Splicer's Scissors

• Multi-purpose service tool
• Hot-forged steel, double-plated with chrome over nickel
• Stripping notches for 19 and 23 gauge wire
• Scraper and file on back of blade

Splicer's knife

• Tough, coping-style blade
• Forged steel
• Full-size, high-dielectric, red-cushioned handle

Holster

• holds knife and scissors
• Heavy duty genuine leather
• Stitched and riveted for greater strength
• Slots provided for mounting on belt

    With a non-slip serrated blade, the 86 1/2S provide the solution for trimming back the DuPont Kevlar that serves as the central strength member in optical fiber.  The shears are made of hot-forged, high-carbon steel for long life.   It has a quick action spring response so the tool is ready when you are.  It's high leverage provides powerful cutting action.  Also available with cushioned grips. (model 86 1/2SF)

    With a non-slip serrated blade, the KC699 provide the solution for trimming back the DuPont Kevlar that serves as the central strength member in optical fiber.  It's high leverage provides powerful cutting action.  The KC699 is a value-priced tool and has a soft, cushioned, oversized bows for operator comfort. Blades are hardened stainless steel.

• accurate to - 0mm, + .0127mm
• No adjustments necessary

    Tired of costly rejects when you prepare fiberoptics? Improper removal of Buffer Coatings cost you time and money.  You can do the job quickly and with total reliability.

    NO-NIK Fiberoptic Strippers meet the most stringent specifications.  Used properly they are 100% reliable!  Plastic heads, which make contact only with the Buffer, center and support your work on both sides.  Cutting blades made from razor quality steel score the Buffer completely.  Back-up blades support the cutting blades, nest positively, and "lock up" when the tool is closed to maintain perfect concentricity.  Buffer being removed acts as guide and protection for the fiber.

    Color coated handles ensure proper tool selection, quickly and easily.

    Many fibers need no secondary cleaning.  However, some primary coatings can leave residue on the fiber and may require some chemical cleaning to insure a pristine surface.

CFS-2

For stripping 125 micron fiber with 250 micron buffer coating

Special Features:

• 1.0mm diameter stripping hole at the tip of tool can be used to strip the fiber jacket
• 140 um diameter hole and V-opening in blade allows removal of 250 micron buffer
• Pre-set at the factory - no adjustments needed
• Will not scratch or nick glass fiber
• All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
• Comfort-grip, ergonomic handles
• Lock to hold tool closed when it is not in use
• Made in the USA

FJS-2

    The FJS-2 Fiberoptic Jacket Stripper removes the outside jacket from fiberoptic cable.  Two stripping notches, one with a cutting diameter of 1.25mm and one with a cutting diameter of 1.50mm, can be used on several sizes of cable.  The 1.50mm notch works especially well on loose tube cable.  It is easy to use and always leaves a clean strip.

    This Kit provides users with three basic tools for fiberoptic stripping:

• NO-NIK Fiberoptic Stripper
• 86 1/2SF High Leverage Kevlar Shear
• FJS-2 Jacket Stripper

Fiber Optic Crimpers

Fiber optic connectors call for precision crimping which must meet non-optical disconnect requirements or increased pull strength demands. The PALADIN® Crimp Tool is designed to successfully assemble a variety of connector styles for maximum optical performance and mechanical strength.

Crimpers	crimp sizes
Triple Hex Die	.065, .128, .178
Triple Hex Tool & Die	.151, .178, .213
Triple Round Tool & Die	.133, .160, .195

Home  ·  Products  ·  Get a Quote  ·  Contact Us  ·  Links  ·  Search

© 2005 Precision Polishing Inc